ExtraLink POE-24-24W, 100mb/s Power-over-Ethernet (PoE) power supply 24V, 1A, 24W, AC cable included. It provides DC power for PoE-equipped device by "Injecting" DC power through the ethernet cable. It is compatible with Ubiquiti and MikroTik RouterBoard, AP's and other equipment supporting the standard PoE pinout. DC Grounded. Euro AC cord with ground wire included.
ExtraLink POE-24-24W-G, Gigabit Power-over-Ethernet (PoE) power supply 24V, 1A, 24W, Gigabit, AC cable included. It provides DC power for PoE-equipped device by "Injecting" DC power through the ethernet cable. It is compatible with Ubiquiti and MikroTik RouterBoard, AP's and other equipment supporting the standard PoE pinout. DC Grounded. Euro AC cord with ground wire included.
MaxLink POE-AFA-1, MaxLink pasivna POE injector, Passive PoE injector is used to power most RouterBoards, can be used to power any device with an appropriate input power connector. PoE Injector does not meet spec IEEE 802.3af.
MaxLink MAXPI15, PoE injector - 802.3af, 48V, 0.32A, 15,4W, 1Gbit, power cord. Gigabit PoE injector with very good quality and one output POE port for powering devices supporting 802.3af with maximum power consumption up to 15,4W. The power supply is guided over 4,5 (+) and 7,8 (-) wires.
MaxLink MAXPI15S, PoE injector with 1 POE Out ethernet port - 802.3af, 48V, 0.32A, provides 15,4W, 1Gbit, socket. Powering through pins 4,5(+) and 7,8(-)
MaxLink MAXPI30, PoE injector - 802.3af/at, 55V, 0.55A, 30W, 1Gbit, power cord. Operating temperature [°C]: -10 up to 45. The power supply is guided over 4,5 (+) and 7,8 (-) wires.
MaxLink PI60F, high-quality Gigabit POE injector with a single POE port, LAN port and one SFP port for powering 802.3af/at devices with maximum power consumption up to 60W.
MikroTik PW48V-12V85W, ±48 V DC telecom Open Frame Power supply with 12 V 8 A output, for use with new “r2” revision of Cloud Core Routers. Simply remove one of the current power supplies and replace with the new PW48V-12V85W for ±48 V installations.
MikroTik RBGPOE-CON-HP, 48V to 24V Gigabit PoE Converter, Simply plug any 48V PoE powered ethernet cable into one port, and any 8-30V capable RouterBOARD device into the other. This device is capable to provide high power output - up to 24W (up to 1A at 24V).
Mikrotik 48V2A96W, 48V/2A 96W power supply, to be used with our products that support 48 V POE output, like hEX PoE and CRS112-8P-4S-IN. It’s providing 30% more current than the old model 48POW (48 V 1.46 A 70 W), allowing more power per port.