Mikrotik GM-1810, MikroTik Power Adapter 18V 1A for RouterBOARD, ALIX (05/10)

MIK-RB-POE, Mikrotik PoE injektor, Ethernet Speed: 10/100 Mbps, Low-cost passive PoE base unit for powering passive PoE devices over ethernet. Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower, and in other situations. For using with RouterBOARDS that support 10-28V PoE powering, input needs to be at least 18V to accomodate any losses in cables.

Mikrotik RB-GPOE, Gigabit PoE injek. LED, The new MikroTik Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower. For using with any RouterBOARD that supports 18-57V PoE.

MikroTik CA411, Indoor case for RouterBOARD RB411, RB711, RB911 (three holes for Nfemale Bulkhead connectors or Swivel antennas)

MikroTik CA433U, Indoor case (3 holes for Nfemale Bulkhead connectors or Swivel antennas and hole for USB), Fits RB433, RB433AH and RB433UAH

MIK-GM-1210, MikroTik Power Adapter 12V 1A for RouterBOARD, ALIX (05/10)

Mikrotik HS24-2400, Mikrotik POE power injector adapter 24V 1A 24W for MikroTik RouterBOARD and ALIX

Mikrotik RB800, Custom make your own High Power Wireless Router with Multi Interfaces. RouterBoard has Freescale MPC8544 800MHz CPU, 256MB DDR2 SDRAM, NAND memory chip + Compact Flash slot, (3)1000 Mbit/s Gigabit Ethernet ports, (4) miniPCI slots, (1) miniPCI-e, (1) regular PCI daughterboard port, (1) PCI-e daughterboard port, (1) DB9 RS232C serial port, RouterOS Level 6 license, Power Required Power over Ethernet: 36-56V DC (802.3af/at compatible) Power jack: 10-57V DC, Max Power consumption 25W, Dimension 14 cm x 20 cm, Options not Included Active 802.3af/at PoE Injector Power Adapter MIK-24POW, MIK-24HPOW , MIK-48POW, mini PCI R5SHpn, R52H, R52nM, R52N, PCI RB502, RB604, Indoor Case Mikrotik CA800

MirkoTik CA435, Mounting box CA435 for RouterBOARD RB435

Mikrotik GM-2410, MikroTik Power Adapter 24V 1A for RouterBOARD, ALIX (05/10). Output connector [mm]: 5.5

Mikrotik RBOMNITIKUPA-5HNDr2 (OmniTik 5 PoE), Wireless 5Ghz 802.11a/n 26dBm 400mW Weatherproof outdoor AP with 2x2 Mimo 7.5dBi omni antenas with different polarities (ch0 horizontal, ch1 vertical polarization). Beamwidth H-Plane, 360° E-Plane 7°, Atheros AR7241 400MHz CPU, 32MB DDR SDRAM, 64MB onboard NAND, (5)10/100Mbit/s Ethernet ports, Ports 2-5 support PoE output . Max current 500mA per port. (1)USB 2.0 Type A Port, RouterOS Level5 License, Power Required Passive 9-30V PoE only. Max Power Consumption 11W, Included OmniTik UPA-5HnD, mounting metal ring, PoE injector, 24V 2.5A power adapter It supports Nv2 TDMA technology with up to 200Mbit aggregate throughput. Can be used as CPE, PtP or AP as a sector

Mikrotik GM-2440, MikroTik Power Adapter 24V 4A, 96W for RouterBOARD, ALIX

Mikrotik SWL4, RouterOS Level 4 license, When ordering you must specify RouterOS Level and if you would like a version for PC or for RouterBOARD and you must provide SoftId.

Mikrotik GM-2420, MikroTik Power Adapter 24V 2A, 48W for RouterBOARD, ALIX (05/10)

MikroTik RB260GS, (6)Port Desktop Smart Managed Switch, (5)1000Mbit/s Gigabit RJ45 ports + (1)1.25Gig SFP cage., (SFP module not included), Switching is done by an Atheros Switch Chip. Operating System SwOS, Includes plastic case, 12V 1A power adapter, Can be powered by PoE-In 6V - 31 V on Ether1 (Non 802.3af/at). Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included)

MikroTik SFP module S-31DLC20D, a 1.25G SFP transceiver with a 1310nm Dual LC connector, for up to 20 kilometer Single Mode fiber connections, with DDM, Units are tested and compatible with CCR1072, CCR1036, CCR1016, CCR1009, CRS125, CRS226, CRS212, CRS210, CRS112, CRS109, RB3011, RB2011, RB260, RB922/921, RB953GS, hAP AC, FTC. Units are compatible with non-MikroTik SFP devices as well.

Mikrotik RB911G-5HPnD, High Power RouterBoard used to build a small 5GHz wireless router with an integrated dual chain 802.11a/n 30dBm 1000mW high power wireless card. AR9342 600MHz CPU, 32MB DDR RAM, 128MB NAND, 2x MMCX connectors, (1) 10/100/1000 Gigabit ethernet port, WISP CPE (RouterOS level 3) license which can be a router, firewall, bandwidth manager, CPE and more all at same time, Power Required PoE: 8 to 30V DC on Eth 1 (Non 802.3af) or power adapter for Power jack: 8..30V DC, Max power consumption 11W. Dimension 105x105mm. Options Not included Indoor Case: MIK-CA411, MMCX Antena MIK-ACSWIM, Passive 24V PoE Injector, MIK-HS24-2400, MIK-HC24-2400, Power Adapter MIK-24POW, MIK-24HPOW

Mikrotik RB912UAG-5HPnD, High Power RouterBoard used to build a 5GHz 802.11a/n wireless router with an integrated high power (1000mW) 30dBm 5Ghz 2x2 dual chain wireless chip + an additional miniPCIe slot for a second 802.11 wireless, or 3G card. Atheros AR9342 600MHz CPU, 64MB DDR2 RAM, 64MB NAND storage, (1)10/100/1000 Mbit/s Gigabit Ethernet port, (1) MiniPCI-e slot, (1)USB 2.0 port. (2)MMCX connectors for antenas. Power Required Passive PoE-in: 8-30V DC on Ether1 (Non 802.3af). Max Power consumption 14W. Includes RouterOS Level4 License. Accessories sold seperate Indoor Case: MIK-CA411, MMCX Antena MIK-ACSWIM, Passive 24V PoE Injector MIK-HS24-2400, MIK-HC24-2400

Mikrotik RBGrooveA-52HPn (GrooveA 52), Wireless Outdoor Radio Operates in either 2.4GHz 802.11b/g/n or 5GHz 802.11a/n (software selectable), Max TX power 27 dBm 500mW, built-in N-male connector, Atheros AR9342 600Mhz CPU, 64MB RAM, (1)10/100 Mbps RJ45 Port, Power Required Passive 9-30V PoE only. Max power consumption 4.56W, RouterOS Level4 License, Includes Groove unit, mounting loops, PoE injector, 24V power adapter, 6dBi 2.4/5Ghz Omni antenna, Functions as Access Point, Basestation or PtP

MikroTik CA493, OEM Mounting box CA493 for RouterBOARD RB493, RB192, Black aluminium Indoor case (3 holes for Nfemale Bulkhead connectors or AC/SWI Swivel antennas). This new revision is slightly higher, to fit more miniPCI card models.

Mikrotik RB912UAG-2HPnD, High Power RouterBoard used to build a 2.4GHz 802.11b/g/n wireless router with an integrated high power (1000mW) 30dBm 2.4Ghz 2x2 dual chain wireless chip + an additional miniPCIe slot for a second 802.11 wireless, or 3G card. Atheros AR9342 600MHz CPU, 64MB DDR2 RAM, 64MB NAND storage, (1)10/100/1000 Mbit/s Gigabit Ethernet port, (1) MiniPCI-e slot, (1)USB 2.0 port. (2)MMCX connectors for antenas. Power Required Passive PoE-in: 8-30V DC on Ether1 (Non 802.3af). Max Power consumption 14W. Includes RouterOS Level4 License. Accessories sold seperate Indoor Case: MIK-CA411, MMCX Antena MIK-ACSWIM, Passive 24V PoE Injector MIK-HS24-2400, MIK-HC24-2400

Mikrotik RB951Ui-2HnD, High Power 2,4GHz 1000mW 802.11b/g/n Wireless SOHO AP with Atheros AR9344 600MHz CPU, 128MB of RAM. It has five 10/100 Mbit/s RJ45 Ethernet ports and PoE output function for port #5, one USB 2.0 port. Includes AP in a plastic case, 24V 0.8A power adapter, Built-In 2x2 MIMO PIF antennas, max gain 2.5dBi

Mikrotik RB911G-2HPnD, High Power RouterBoard used to build a small 2.4GHz wireless router with an integrated dual chain 802.11b/g/n 30dBm 1000mW high power wireless card. AR9342 600MHz CPU, 32MB DDR RAM, 128MB NAND, 2x MMCX connectors, (1) 10/100/1000 Gigabit ethernet port, WISP CPE (RouterOS level 3) license which can be a router, firewall, bandwidth manager, CPE and more all at same time, Power Required PoE: 8 to 30V DC on Eth 1 (Non 802.3af) or power adapter for Power jack: 8..30V DC, Max power consumption 11W. Dimension 105x105mm. Options Not included Indoor Case: MIK-CA411, MMCX Antena MIK-ACSWIM, Passive 24V PoE Injector, MIK-HS24-2400, MIK-HC24-2400, Power Adapter MIK-24POW, MIK-24HPOW

Mikrotik HC24-2400, Mikrotik POE power injector adapter 24V 1A 24W, grounded, desktop type for MikroTik RouterBOARD and ALIX

MikroTik 24HPOW, High power 24V 2.5A (60W) output power supply + power plug. Input voltage 240V 1.6A. Power supply with 2.1mm DC plug. Uses standard IEC C13 to German Schuko power cord (included). Recomended for long cable runs.

MikroTik RB912UAG-5HPnD-OUT, (BaseBox5) Outdoor 5Ghz 802.11a/n wireless device in a weatherproof enclosure with two SMA connectors for antenas and a cable hood for protection against moisture. Max TX Power 30 dBm, Atheros AR9342 600MHz CPU, 64MB DDR onboard memory, (1) 1000Mbit Gigabit RJ45 port, (1) miniPCIe slot for adding an additional 802.11 wireless card or 3G, (1) USB 2.0 port, (2)RP-SMA Female Connectors (outside thread) to connect extrenal antenas. Power Option: PoE: 8-30V DC on Ether1 (Non 802.3af). Consumption: 14W at 24V, Includes RB912 outdoor unit, 24V 0.8A Power Adapter, PoE injector, mounting loop, DIN rail mount, mounting ring, RouterOS, Level4 license. Also available are three additional places for antenna connectors, in case you wish to use the BaseBox miniPCIe slot for one more wireless interface to make a dual band device, or a 3G/4G modem. Wireless Modes AP/Wireless Client/Bridge. Dimension 246x135x50mm

Mikrotik SWL5, RouterOS Level 5 license, When ordering you must specify RouterOS Level and if you would like a version for x.86 PC or for RouterBOARD and you must provide SoftId.

Mikrotik R11E-5HnD, Wireless 5GHz (500mW) 27dBm 802.11a/n MiniPCI-e card with Dual Chain two MMCX connectors, large heatsink. Max Power Consumption 5W, Dimension 51x30x13mm. Compatible with Mikrotik RB912 series, RB800 or miniPCIe adapters - RB14e/RB14eU

MikroTik CRS125-24G-1S-2HnD-IN, (25)Port Cloud Core Wireless AP/Router/Layer3 Desktop Switch, (24)1000Mbit/s RJ45 Ports + (1)1.25Gig SFP cage, (Mini-GBIC; SFP module not included) + Integrated 802.11b/g/n Wireless AP 1000mW 30dBM (2 chains) + (1) microUSB port + (1)RJ45 serial port. Atheros AR9344 600MHz CPU, 128MB RAM, RouterOS Level 5 License, LCDpanel, Includes PSU or can be powered by PoE-In 8-30V DC on Ether1 (Non 802.3af). Max Power Consumption 15W. Includes Desktop Case, 24V 1.2A power adapter, (2) built in 4dbi antenas, USB OTG cable. Dimension 285x145x45mm. Built in 2.4GHz 11n wireless access point, you can have an AP, a router with any number of ports, and a full wire speed smart switch, all in one device. Options Not included SFP modules: S-85DLC05D, S-31DLC20D and S-3553LC20D, S-RJ01 SFP direct attach cables S+DA0001, S+DA0003

MikroTik S-85DLC05D, 1.25G SFP transceiver with a 850nm Dual LC connector, for up to 550 meter Multi Mode fiber connection, with DDM compatible with RB260GS, RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD, RB2011UAS-2HnD-IN and CCR1036-12G-4S.