Mikrotik RB411AH, Customizable RouterBoard with one Ethernet and one miniPCI slot. Use this device in an indoor/outdoor case to create an AP/CPE device or a point to point wireless link Atheros AR7161 680MHz CPU, 64MB DDR SDRAM, 64MB onboard NAND, (1)10/100 Mbit/s ethernet port, (1) MiniPCI slot, (1) DB9 RS232C serial port, Power options: can be Powered over Ethernet Lan: 10..28V (non 802.3af), or power supply (sold seperate) Power jack: 10..28V DC, Max power consumption 3W without miniPCI card, maximum–12 W, Includes Router OS Level 4 license, Dimension 10.5cm x 10.5cm. Options not included Passive 24V PoE Injector MIK-HS24-2400, MIK-HC24-2400, Power Adapter MIK-24POW, MIK-24HPOW, Wireless PCI Cards R52H, R52HN, R52NM, Case RF Elements SBX-INSPOT
MikroTik S+DA0001, SFP/SFP+ direct attach cable, 1m, connect two SFP/SFP+ devices (for example two units of CCR1036-8G-2S+) for very short distances, within racks and across adjacent racks. low latency interconnect solution for 10-Gigabit Ethernet
MikroTik S+DA0003, SFP/SFP+ direct attach cable, 3m, connect two SFP/SFP+ devices (for example two units of CCR1036-8G-2S+) for very short distances, within racks and across adjacent racks. low latency interconnect solution for 10-Gigabit Ethernet
MikroTik S+85DLC03D, 10G SFP+ transceiver with a LC connector, 850nm, for up to 300 meter Multi Mode fiber connections, compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM. Units are compatible with non-MikroTik SFP devices as well.
MikroTik SFP module S-31DLC20D, a 1.25G SFP transceiver with a 1310nm Dual LC connector, for up to 20 kilometer Single Mode fiber connections, with DDM, Units are tested and compatible with CCR1072, CCR1036, CCR1016, CCR1009, CRS125, CRS226, CRS212, CRS210, CRS112, CRS109, RB3011, RB2011, RB260, RB922/921, RB953GS, hAP AC, FTC. Units are compatible with non-MikroTik SFP devices as well.
MikroTik LtAP mini LTE (RB912R-2nD-LTm&R11e-LTE), small waterproof wireless access point with a built in cellular modem that supports 2G (international version only), 3G and 4G (LTE) connectivity.
Connect to the LtAP mini's built-in 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device. The LtAP mini also has one 10/100 Ethernet LAN port for your wired devices. The RS232 serial port gives you console access for debugging.
LtAP mini has a special enclosure with a wall mounting kit, two SIM slots to alternate between cellular providers, and integrated GPS support, External GPS antenna is available for ordering separately (not included, product code ACGPSA).
MikroTik mUPS, The mUPS is a smart PoE injector with a 12V battery connector. It works just like a Gigabit PoE injector, but when power is lost, it switches over to the 12V battery (not included). Even if your power source is 28V, the connected RouterBOARD will not reboot when the power source is lost, it will switch over to the 12V battery transparently.
The mUPS is a simple and compact device to make your network more reliable, or for situations where stable power input is not available, like solar or automotive installations.
Sve cijene iskazane su u Hrvatskim Kunama i uključuju PDV. Trudimo se dati što bolji i točniji opis i sliku. Unatoč tome, ne možemo garantirati da su svi navedeni podaci i slike u potpunosti točni. Ne odgovaramo za eventualne pogreške nastale u opisu proizvoda, greške prilikom štampanja te promjene cijena.