Aletrnaive Energy Sources-Solar

View as
Sort by
Display per page

Ubiquiti Networks sunMAX Cable Support Clips Kit 50-Pack

Ubiquiti Networks sunMAX SM-CC, Cable Support Clips Kit hook and snap onto the solar panel`s edge from underneath to support and secure Jumper Cables and Y-Cables. Sold in quantities of 50.
€8.22
Pre-order by phone

Ubiquiti Networks sunMAX Connector Mounts

Ubiquiti Networks sunMAX SM-CM, Connector Mount is used to connect panels side by side (one on bottom and one on top) structurally in locations where the Mounting Assembly would coincide with a Panel Connector location. The Connector Mount is used in place of a Mounting Assembly and Panel Connector in that location. Sold in quantities of 10.
€9.51
Pre-order by phone

Ubiquiti Networks sunMAX End Run Kit

Ubiquiti Networks sunMAX SM-EC-EU End Run Kit provides easy adaptation of cabling from the array to the electrical panel feeding the grid. It connects the open-ended Y-cable in your solar array to the house-side wiring that feeds into the electrical panel on the outside of your home. The End Run Kit includes the End Run, a Cabling End Cap, and a Grounding Kit (stud and nut).
€56.44
Pre-order by phone

Ubiquiti Networks sunMaX Jumper Cable

Ubiquiti Networks sunMaX SM-JC-3C Jumper Cable connects power cables on panels from adjacent rows (portrait) or columns (landscape). Sold in quanitites of 5. Cable 12 AWG, 3-Conductor
€30.87
Pre-order by phone

Ubiquiti Networks sunMAX Microinverter

Ubiquiti Networks sunMax SM-MI-250-EU, Microinverter integrates into the sunMAX Solar Panel as an independent power generation unit. The Microinverter converts the DC power from the solar panel into AC power that can be connected directly to your home. Ubiquiti`s cloud based sunMAX software provides monitoring capability for desktops and mobile devices.
€128.97
Pre-order by phone

Ubiquiti Networks sunMAX Mounting Assemblies

Ubiquiti Networks sunMAX SM-MA Mounting Assembly is used to support panels off roof mounts. Mounting assemblies are always located along the horizontal edges of panels. Typically there is at least one mounting assembly at the top and bottom of each panel. Sold in quantities of 10.
€4.82
Pre-order by phone

Ubiquiti Networks sunMAX Panel Connectors

Ubiquiti Networks sunMAX SM-PC Panel Connector is used to connect adjacent panels structurally and electrically bond them together. There is always one at the top and the bottom between every panel that is side by side. Sold in quantities of 10.
€8.16
Pre-order by phone

Ubiquiti Networks sunMAX Roof Mount Kit

Ubiquiti Networks sunMAX SM-RM-C, The Roof Mount Kit is the structural mount between the roof structure and the solar panel. The mount uses roof flashing to ensure a watertight roof connection. The Roof Mount Kit is intended for use on asphalt composite shingle roofs and as a base mount for tile roofs when used in conjunction with the Tile Roof Accessory Kit, model SM-RM-T.
€6.54
Pre-order by phone

Ubiquiti Networks sunMAX Solar Gateway

Ubiqiquiti Networks SM-PICO sunMAX Solar Gateway communicates with all Microinverters in an array using Bluetooth and then broadcasts data via Ethernet. For this data Ubiquiti prepared cloud based sunMAX software, which provides monitoring capability for desktops and mobile devices.
€74.04
Pre-order by phone

Ubiquiti Networks sunMAX Tile Roof Accessory Kit

Ubiquiti Networks sunMAX SM-RM-T, base mount for tile roofs when used in conjunction with the Tile Roof Accessory Kit. The Tile Roof Accessory Kit includes the extra components needed when mounting the panel hardware on a tile roof
€9.63
Pre-order by phone

Ubiquiti Networks sunMAX Trim Cover Kit 1-Panel Portrait

Ubiquiti Networks SM-TC-1P, sunMAX Trim Cover Kit. The SM-TC-1P Trim Cover Kit is only used in portrait installations with an odd number of columns. The single-panel version is used in the center. Sold in quantities of 5. Dimension 128.2 x 33.3 x 1003 mm.
€20.81
Pre-order by phone

Ubiquiti Networks sunMAX Trim Cover Kit 2-Panel Portrait

Ubiquiti Networks SM-TC-2P, sunMAX Trim Cover Kit. The SM-TC-2P Trim Cover Kit spans the width of two panels installed in a portrait installation. It is best to use these whenever possible and use the single-panel version only as needed. Sold in quantities of 5. Dimension 128.2 x 33.3 x 2006 mm
€46.23
Pre-order by phone